Your shopping cart is empty!
Chainsaw
Features for the Makita XCU08PT - Chainsaw Makita-built Outer Rotor BL™ Brushless Motor direct-drive system provides power equivalent to a 30cc gas chain sawVariable speed trigger and high chain speed (0-3,940 FPM) for improved cutting performanceTorque boost mode powers through thick or hard branchesTwo 18V LXT® Lithium-Ion batteries deliver 36V power and performance without leaving the 18V LXT® platformIncludes 14" sprocket nose guide bar and 3/8 pitch, .043”-gauge chainCaptured bar nut and lateral chain tensioning for convenient operation and maintenanceAdjustable automatic chain lubrication with large oil reservoirLarge oil filling port with view window allows operator to easily add and check bar oil levelBuilt-in L.E.D. on/off switch with auto power-off function; automatically shuts the saw off after 60 seconds for extended battery lifeBuilt-in lock-off lever helps prevent the chain from accidentally engagingLow noise level and zero emissions for operator comfortRubberized soft grip top handle is engineered for the user to apply even more easily cutting pressureEquipped with Star Protection Computer Controls™ to protect against overloading, over-discharging, and over-heatingFeatures Extreme Protection Technology (XPT™) which is engineered to provide increased dust and water resistance in harsh job site conditionsOnly use genuine Makita batteries and chargersINCLUDES36V (18V X2) LXT® Brushless 14" Top Handle Chain Saw (XCU08Z)18V LXT® Lithium-Ion 5.0Ah Battery (BL1850B)18V LXT® Lithium-Ion Dual Port Charger (DC18RD)14" Guide Bar, 3/8” LP, .043” (E-00072)14" Saw Chain, 3/8” LP, .043” (E-00228)14" Chain CoverSpecificationsGuide Bar Length: 14"Pitch: 3/8" LPGauge: .043"Chain Speed: 3,940 FPMNet Weight (with battery): 10.2 lbs.Net Weight (without battery): 7.4 lbs.Battery: 2X 18V LXT® Lithium-IonPower Type: CordlessHandle Type (Chainsaws): Top handleForm Factor (LXT): X2Motor Type: BrushlessShipping Weight: 18.92 lbs...
$354.00
No gas, emissions, oil mixing or pull starts with reduced maintenance and low noise levelsMakita-built outer rotor brushless motor direct-drive system delivers power of a 32cc gas chain sawTwo 18V LXT® Lithium-Ion batteries deliver power and performance without leaving the 18V LXT® platformUp to 300 cuts in 4 x 4 cedar with four 18V LXT® 4.0Ah batteries"Tool-less" chain adjustment for convenient operation and maintenanceVariable speed trigger and high chain speed (0-3,940 FPM) for improved cutting performanceAdjustable automatic chain lubrication with large oil reservoirLarge oil filling port with view window allows operator to easily add and check bar oil levelBuilt-in L.E.D. on/off switch with auto power-off function; automatically shuts the saw off when operation is delayed for extended battery lifeRubberized soft grip top handle is engineered for the user to apply even more easily cutting pressureFeatures Extreme Protection Technology (XPT™) which is engineered to provide increased dust and water resistance in harsh job site conditionsEquipped with Star Protection Computer Controls™ to protect against overloading, over-discharging, and over-heatingOnly use genuine Makita batteries and chargers..
$238.00
Features for the Makita EA3200SRBB - Chainsaw Lightweight and Compact: Weights only 9 lbs. (w/o bar and chain) to reduce fatigue. Designed for operator comfort.Touch and Stop: Easily shut off the engine with one touch of a single lever control.Easy Refueling: A large fuel opening with an S-form cap allows for easy refueling and operation.Chain Compartment: Easy to clean and clear away chips.Primer Pump: Provides easier cold starting.Vibration Dampening System: Engineered for reduced vibration...
$198.00
Features for the Makita EA4300FRDB - Chainsaw This is a 16’’ chainsaw with a powerful 3 HP, 42cc engine. The EA4300FRDB has a compact design and weighs around 10.8 lbs. to help make the operation of the equipment as easy as possible. Despite its light weight, this chainsaw features a large metal spike bar that will greatly increase productivity. Also included is a touch & stop single lever control that shuts off the engine with one touch, as well as a durable, two point mechanical chain brake. The EA4300FRDB will efficiently perform almost any reasonable job with its powerful engine, and allow for easy and quick maintenance and cleaning. A primer pump that is engineered for cold starting and a slide-out baffle that can be configured for better cold weather use allow this model to have much more operational versatility. Cutting Power:The 42cc, 3 HP engine packs enough power to step up to almost any task for its size. Great for any farm and ranch work!Less Fatigue, More Productivity:Spring-assisted starting and a lightweight, compact design (10.8 lbs.) will help to greatly reduce the fatigue of operating this chainsaw. This model features a large metal spike bar and tool-less filter access for increased productivity and less hassle.Comfort and Endurance:The EA4300F40B has an advanced vibration dampening system to reduce vibration during use and extend the life of the equipment. An easily accessible and cleanable chain compartment and smooth, rounded surfaces will provide higher equipment endurance and comfort.Easy Refueling and Oil Change:The fuel and oil tank openings are large, with S-form caps to make operation, refueling, and changing oil much easier.Includes:EA4300FRDB 16’’ 42cc Chainsaw, (1) 16’’ Saw Chain, (1) 16’’ Guide Bar, (1) 16’’ Chain Cover..
$345.00
Features for the Makita EA5000PREG - Chainsaw Lightweight and Compact: Weights only 11.9 lbs. (w/o bar and chain) to reduce fatigue. Designed for operator comfort with smooth, rounded surfaces.Touch and Stop: Easily shut off the engine with one touch of a single lever control.Spring-Assisted Starting: Requires less force to start the engine.Easy Refueling: A large fuel opening with an S-form cap allows for easy refueling and operation.Chain Compartment: Easy to clean and clear away chips.Slide-Out Baffle: Improves cold weather operation.Vibration Dampening System: Engineered for reduced vibration.Reversible Sprocket Nose Bar: Oil retaining feature helps to improve bar and chain lubrication.Floating Rim Sprocket: Allows for easier maintenance and increased chain life.Magnesium Housing: Improves durability.Large Metal Spike: Increases productivity..
$411.00
Heavy Duty Air Filter: Designed for extended air filter life and durability.Easy Starting: Spring-assisted and requires less force to start.Lightweight and Compact: Weighs in at only 12.8 lbs. (without bar and chain), reducing operator fatigue. Designed for comfort.13,800 RPM..
$423.00
Features for the Makita EA6100PRGG - Chainsaw Spring-Assisted Starter: Combined with optimized engine management for easy and quicker starting that requires less force.Powerful Engine: A 4.6 HP stratified air scavenging engine creates fewer emissions and has greater fuel efficiency.Magnesium Housing: Incredible durability and less weight.Heavy Duty Air Filter: A heavy-duty cartridge air filter system helps extend the life of the air filter and improves overall durability of your equipment.13,800 RPM: Fast acceleration for efficient cutting.Compact Design: Engineered with smooth, rounded surfaces to allow for easier cleaning and improved operational comfort.Touch & Stop: Shut off the engine with one touch.Slide-Out Baffle: Configurable for better operation in cold weather.Chain Compartment Access: Easy to clean. Clears chips away efficiently.Lateral Chain Tensioning: Easily adjustable chain tension.Vibration Dampening System: Engineered to reduce vibration.Floating Rim Sprocket: Easy to maintain and greatly improves chain life...
$521.00
Features for the Makita EA7900PRZ1 - Chainsaw Heavy-duty air filter system for extended air filter life and improved durabilityEasy-starting automatic half throttle lockChain compartment is easy to clean and clears chips away efficientlySlide out baffle can be configured for efficient cold weather operationTwo-point durable inertia/mechanical chain brakeDecompression valve reduces force required for startingHigh power-to-weight ratio weighs only 14.7 lbs. (bar and chain not included)Lateral chain tensioning for quick and convenient chain adjustmentAdvanced vibration dampening system engineered to reduce vibrationLarge metal spike bar for increased productivityINCLUDES20-24" Chain Cover (952-020-660)SpecificationsEngine Displacement (cu.in. /cc): 4.8 cu.in. (78.5 cc)Power Rating: 5.7 HP/4.3 kWMax. Engine Speed: 12,800 RPMChain Saw Configuration: Powerhead onlyPitch: 3/8"Fuel Mixture: 50:1Fuel Tank Capacity: 25.4 oz.Oil Tank Capacity: 14.2 oz.Net Weight (w/o bar & chain): 14.7 lbs.User Type: ProfessionalChain Saw Feature: Heavy duty air filterPower Type: 2-stroke gasChain Selection: 3/8 x .050Shipping Weight: 18.5 lbs...
$578.00
Heavy Duty Air Filter System: Extends air filter life and improves durability.Chain Compartment: Easy to clean and chips are cleared away efficiently.Slide Out Baffle: Can be configured for more efficient operation during cold weather.Metal Spike Bar: A large metal spike bar increases productivity.Two-Point Durable Inertia: Two-point durable inertia/mechanical chain brake.Decompression Valve: Reduces the force that is required to start the chainsaw.Power to Weight Ratio: 79cc and 5.7 HP with a weight of only 14.7 lbs. (not including bar and chain).Engine Speed: Has a maximum engine speed of 13,500 RPM.Lateral Chain Tensioning: Provides quick and convenient chain adjustment capability.Less Vibration:Engineered to reduce vibration with an advanced vibration dampening system...
$744.00
Features for the Makita EA3201SRBB - Chainsaw The Makita EA3201SRBB is a 14’’ chainsaw with an incredibly high power-to-weight ratio, 1.8 HP, 32cc engine. Weighing in at only 9.4 lbs., this chainsaw features a large metal spike bar that will greatly increase productivity. This chainsaw includes a touch & stop single lever control that shuts off the engine with one touch, as well as a durable, two point mechanical chain brake. The EA3201SRBB will efficiently perform almost any reasonable job with its powerful engine, and allow for easy and quick maintenance and cleaning. Cutting Power and Precision:The 32cc, 1.8 HP engine packs enough power to step up to almost any task for its size. 33 cm markings on the rear handle allow for cutting wood to length.Less Fatigue, More Productivity:Spring-assisted starting and a lightweight, compact design (9.4 lbs.) will help to greatly reduce the fatigue of operating this chainsaw. This model features a large metal spike bar and tool-less chain tensioning for increased productivity and less hassle.Comfort and Endurance:The EA3201SRBB has an advanced vibration dampening system to reduce vibration during use and extend the life of the equipment. An easily accessible and cleanable chain compartment will allow higher endurance and performance of the equipment as well!Easy Refueling and Oil Change:The fuel and oil tank openings are large, with S-form caps to make operation, refueling, and changing oil much easier.Includes:EA3201SRBB 14’’ 32cc Chainsaw, (1) 14’’ Chain, (1) 14’’ Guide Bar, (1) Universal Wrench, (1) 14’’ Chain Cover..
$240.00
14.5 amps provide power behind each cut"Tool-less" chain adjustment for convenient operation and maintenanceBuilt-in current limiter helps protect motor from burnout by reducing power to motor when saw is overloadedAutomatic chain oiler for heavy continuous cuttingLarge oil reservoir with view window allows operator to check bar oil levelLarge trigger switch with soft start for smooth start-upsLarge metal spike bumper for gripping material firmlyRubberized soft grip handle provides increased comfort on the jobZero emissions and reduced maintenanceINCLUDES14" Saw Chain, 3/8", .050" (196207-5)14" Guide Bar, 3/8", .050" (165201-8)14" Chain Cover (952-010-630)SpecificationsGuide Bar Length: 14"Pitch: 3/8"Gauge: .050"Chain Speed: 2,900 FPMNet Weight: 12.1 lbs.Oil Tank Capacity: 6.8 oz.Overall Length: 19-7/8"Power Type: CordedShipping Weight: 16.5 lbs...
$188.00
Features for the Makita UC4051A - Chainsaw "Tool-less" blade and chain adjustments for convenient operation and easy maintenanceRubberized grip handles are ergonomically designed for comfortLarge trigger switch with soft start for smooth start-upsBuilt-in current limiter helps protect motor from burnout by reducing power to motor when saw is overloadedLarge oil reservoir with view window allows operator to check bar oil levelAutomatic chain oiler for heavy continuous cuttingElectric chain brake for maximum productivityZero emissions and reduced maintenanceSoft start for smooth start-upsCurrent limiter helps protect motor from damage caused by heatINCLUDES16" Saw Chain, 3/8" LP, .050" (E-00256)16" Guide Bar, 3/8” LP, .050” (E-00103)18" Chain Cover (952-010-640)SpecificationsGuide Bar Length: 16"Pitch: 3/8"Gauge: .050"Chain Speed: 2,900 FPMNet Weight: 12.3 lbs.Oil Tank Capacity: 6.8 oz.Overall Length: 19-7/8"Power Type: CordedShipping Weight: 15.7 lbs...
$237.00
Features for the Makita XCU04Z - Chainsaw No gas, emissions, oil mixing or pull starts with reduced maintenance and low noise levelsMakita-built outer rotor brushless motor direct-drive system delivers power of a 32cc gas chain sawTwo 18V LXT® Lithium-Ion batteries deliver 36V power and performance without leaving the 18V LXT® platform (batteries not included)"Tool-less" chain adjustment for convenient operation and maintenanceVariable speed trigger and high chain speed (0-3,940 FPM) for improved cutting performanceAdjustable automatic chain lubrication with large oil reservoirLarge oil filling port with view window allows operator to easily add and check bar oil levelBuilt-in L.E.D. on/off switch with auto power-off function; automatically shuts the saw off when operation is delayed for extended battery lifeRubberized soft grip top handle is engineered for the user to apply even more easily cutting pressureFeatures Extreme Protection Technology (XPT™) which is engineered to provide increased dust and water resistance in harsh job site conditionsEquipped with Star Protection Computer Controls™ to protect against overloading, over-discharging, and over-heatingBatteries and charger not includedOnly use genuine Makita batteries and chargersINCLUDES16" Guide Bar, 3/8” LP, .043” (E-00094)16" Saw Chain, 3/8” LP, .043” (E-00240)Chain CoverSpecificationsGuide Bar Length: 16"Pitch: 3/8" LPGauge: .043"Chain Speed: 3,940 FPMNet Weight (without battery): 8.3 lbs.Net Weight (with battery): 11.1 lbs.Battery: 2X 18V LXT® Lithium-IonPower Type: CordlessHandle Type (Chainsaws): Rear HandleForm Factor (LXT): X2Motor Type: BrushlessShipping Weight: 11.7 lbs...
No gas, emissions, oil mixing or pull starts with reduced maintenance and low noise levelsMakita-built Outer Rotor BL™ Brushless Motor direct-drive system delivers power of a 32cc gas chain sawTwo 18V LXT® Lithium-Ion batteries deliver 36V power and performance without leaving the 18V LXT® platformUp to 190 cuts in 4 x 4 cedar with two 18V LXT® 5.0Ah batteries"Tool-less" chain adjustment for convenient operation and maintenanceVariable speed trigger and high chain speed (0-3,940 FPM) for improved cutting performanceAdjustable automatic chain lubrication with large oil reservoirLarge oil filling port with view window allows operator to easily add and check bar oil levelBuilt-in L.E.D. on/off switch with auto power-off function; automatically shuts the saw off when operation is delayed for extended battery lifeRubberized soft grip top handle is engineered for the user to apply even more easily cutting pressureFeatures Extreme Protection Technology (XPT™) which is engineered to provide increased dust and water resistance in harsh job site conditionsEquipped with Star Protection Computer Controls™ to protect against overloading, over-discharging, and over-heatingOnly use genuine Makita batteries and chargers..
$286.00
Features for the Makita XCU03Z Weighs only 11.35 lbs. with batteries for reduced operator fatigue (batteries not included)Makita-built Outer Rotor BL™ Brushless Motor direct-drive system provides high power efficiency equivalent to a 32cc gas chain saw"Tool-less" chain adjustment for convenient operation and maintenanceVariable speed trigger (0-3,940 FPM) for easy operationTwo 18V LXT® Lithium-Ion batteries deliver 36V power and performance without leaving the 18V LXT® platform (batteries not included)Built-in L.E.D. on/off switch with auto power-off function; automatically shuts the saw off when operation is delayed for extended battery lifeLow noise level and zero emissions for operator comfortAdjustable automatic chain lubrication with large oil reservoirLarge oil filling port with view window allows operator to easily add and check bar oil levelRubberized soft grip top handle is engineered for the user to apply even more easily cutting pressureFeatures Extreme Protection Technology (XPT™) which is engineered to provide increased dust and water resistance in harsh job site conditionsEquipped with Star Protection Computer Controls™ to protect against overloading, over-discharging, and over-heatingBatteries and charger not includedOnly use genuine Makita batteries and chargersINCLUDES14" Guide Bar, 3/8” LP, .043” (E-00072)14" Saw Chain, 3/8", .043" (196741-5)14" Chain CoverSpecificationsGuide Bar Length: 14"Pitch: 3/8" LPGauge: .043"Chain Speed: 3,940 FPMNet Weight (without battery): 8.2 lbs.Net Weight (with battery): 11 lbs.Battery: 2X 18V LXT® Lithium-IonPower Type: CordlessHandle Type (Chainsaws): Rear HandleForm Factor (LXT): X2Motor Type: BrushlessShipping Weight: 10.5 lbs...
